“Thanks MagVent!”

“When I was researching how to make my dryer exhaust safer and easier to maintain, I found info on MagVent… a Magnetically Aligning Dryer Vent Coupling?‼️ Brilliant. It makes it so easy to provide a clear, straight, un-kinked path for the dryer air to flow to the outside. It also makes it so easy to move the dryer back and have no worries about a proper connection and kinked tubing, etc. Because of the original and unusual installation of the interior dryer vent in 2004, it wasn’t going to be the easiest traditional install. I had to contact customer service at MagVent and send them photos of my situation. Customer Service Rep Angela Proctor researched my set-up and provided a workable, good solution for my non-traditional dryer vent situation. She answered all my questions and gave specific, clear answers in a super-timely manner. I couldn’t be more pleased. While it wasn’t the quickest install because I wanted to get everything just right, it works perfectly…not bad for a 74 year old! Thanks MagVent!”  -LindaT

The following photos and video illustrate a modified installation using aluminum tape and silicone caulk where the wall bracket could not be used.

2 replies on ““Thanks MagVent!””

  1. I have the 90 degree version, and have been very pleased with it until this past weekend. I hooked it up after pulling out the dryer, and got sloppy and tore the foil tube off the magnetic ring. There seems to be no flange there I can reattach with a clamp. Do I have to buy an entire new unit just because of my foolish misstep?

    1. Hello Mr. Crowther,

      Thank you for your purchase. I am so sorry to hear about your torn hose! Unfortunately, there is not currently a flange on the Dryer Side Component to receive a replacement hose. However, we do have a 1 year warranty on our products. Please email your shipping address to angela@magventllc.com, and I will send a replacement Dryer Side Component out to you right away.

      Thanks again. I remain available if I can be of further assistance.

      Kind Regards,

      Angela
      MagVent

Comments are closed.